Integrated Solar Street Light W7115

Integrated Solar Street Light W7115 Series: 200LM/W Outdoor Lighting Without Grid Power

Outdoor lighting bills and trenching costs are two of the largest expenses in any site project. The W7115 series integrated solar street light removes both: a monocrystalline solar panel, a high-density LED array and smart control electronics sit in one die-cast housing that mounts on a wall, pole or column.

Why All-in-One Solar Street Lights Are Replacing Grid-Tied Fixtures

An all in one solar street light generates, stores and delivers its own power. There is no trenching, no meter, no electricity cost after installation, and no underground cabling to fail after years of sun and rain. For contractors, distributors and property managers, that means faster deployment and a lower total cost of ownership across yards, gardens, driveways, garage fronts, farm lanes, parking areas and perimeter fences.

200LM/W LED Array and Monocrystalline Panel

The heart of the W7115 solar street light is a high-density LED array rated at up to 200LM/W luminous efficacy, producing uniform, well-controlled light instead of the patchy hotspots common on entry-level solar lamps. The monocrystalline silicon panel behind it offers a high conversion rate and a long service life, so the fixture recovers charge quickly even on overcast days. Intelligent dusk-to-dawn control starts charging automatically at sunrise and switches the lamp on at night, with no timer and no manual intervention.

Three Lighting Modes, PIR Sensor and Remote Control

A built-in smart PIR motion sensor supports three operating modes. Mode 1 keeps the lamp off and jumps to 100% brightness for 25 seconds when movement is detected. Mode 2 holds a dim output and boosts to full brightness for 25 seconds on detection. Mode 3 provides continuous dim light through the night for pathways and boundary lighting. A hand-held remote control switches modes, adjusts brightness and triggers the SOS emergency output for patrols and remote sites.

IP65 Waterproof and Lightning Resistant

Outdoor solar lighting has to survive heat, dust, rain and storm season. The W7115 housing is IP65 waterproof and heat resistant, with lightning-resistant circuitry and a die-cast body sealed against moisture and insects. It suits exposed installations such as coastal roads, industrial yards, car parks and roadside verges where maintenance access is difficult.

Three Models for Different Mounting Heights

W7115-1 at 625mm, W7115-2 at 706mm and W7115-3 at 787mm share a 226mm width, letting buyers match light output and coverage to wall height, pole spacing and project budget. Every model accepts an adjustable wall or pole bracket, so the beam can be aimed precisely at the target area.

Wholesale Solar Street Light Supply

We supply integrated solar street lights in wholesale volumes for distributors, electrical wholesalers, EPC contractors and public projects, with OEM branding options and project-specific configuration available on request.

Frequently Asked Questions

Do the lights need a power supply? No. The panel charges the built-in system during daylight and the fixture runs independently at night. Can they be mounted on an existing wall? Yes, the bracket fixes to masonry, concrete or steel poles. Are different sizes available for large projects? Yes, three models cover low walls through to high poles.